{"product_id":"exterior-specialty-roof-paint-gloss-whites-7-5l-solacoat-colour-cream","title":"Exterior Specialty Roof Primer (Metal) WHITES 7.5L - Solacoat Colour: White","description":"\u003ch2\u003e\n\u003ca name=\"_Toc125802525\"\u003e\u003c\/a\u003eHeat Reflective Roof Primer (Metal)\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eMust be sold with Solacoat \u003cmeta charset=\"utf-8\"\u003eHeat Reflective Coating topcoat - see separate listing. One coat of primer to 2 coats of topcoat, so 7.5L primer for 15L topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStaff note: Shed\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolacoat Colour: \u003c\/strong\u003e White\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePaint Brand \u0026amp; Type:\u003c\/strong\u003e Solacoat Coolshield WB Primer (Metal\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSolacoat’s WB Primer is a novel water-based primer based on acrylic resin and a zinc phosphate complex that has exceptional adhesion to both ferrous and non-ferrous metals with good anti-­­corrosive properties on Metal Roofing \u0026amp; mild steel. The WB Primer may be top-­­coated with both water based and solvent based coatings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e • Fast drying\u003c\/p\u003e\n\u003cp\u003e• Lead and zinc chromate free\u003c\/p\u003e\n\u003cp\u003e• Excellent for use as a shop primer in prefabrication on mild steel work\u003c\/p\u003e\n\u003cp\u003e• An excellent primer on metal roofing\/walls, aluminum and good on zinc coated metals\u003c\/p\u003e\n\u003cp\u003e• Good gloss holdout\u003c\/p\u003e\n\u003cp\u003e• Can be top-­­coated with conventional water based and solvent based coatings\u003c\/p\u003e\n\u003cp\u003e• Low VOC. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eAreas of Application\u003c\/strong\u003e Suitable for new and old metal roofs and walls, general shop work and production line work, tanks, pipes, agricultural parts. Normally over coated with conventional air-­­drying, spraying finishes such as Insul-Insulation.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e Mild Steel Remove light surface rust with a rust converter according to manufacturer’s instructions or clean and degrease with a Wax and Grease Remover. Prime with WB Primer to 40 -­­ 50 microns.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eGalvanised and Zinc Coated Steel, Aluminium and most non-­­ferrous metals.\u003c\/strong\u003e Clean with Wax and Grease Remover. Allow to dry. Smooth polished aluminum may need to be lightly abraded with a nylon pad. Apply WB Primer at 40 -­­ 50 microns dry film thickness. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eMixing Instructions\u003c\/strong\u003e Stir thoroughly until uniform consistency. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e Do not apply WB Primer if substrate temperature is below 15C or above 85% relative humidity. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBrush or Roller\u003c\/strong\u003e Thinning not required, taking care not to over brush or over roll the coating. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAirless Spray\u003c\/strong\u003e Thin approx. 5-10% with clean water. Tip orifice 0.013” to 0.015”. Apply at 14 to 17 Mpa atomising pressure. Apply one coat to a dry film thickness of 40 -­­ 50microns. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eConventional Spray\u003c\/strong\u003e Thin approx. 15%. Apply at air atomising pressure of 350 to 400kPa. Apply one coat to a dry film thickness of 40 -­­ 50microns. Thinner Water Cleaner Initially water to remove the bulk of the material then use a final rinse of methylated spirits or lacquer thinners.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eThinner \u003c\/strong\u003eWater \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCleaner\u003c\/strong\u003e Initially water to remove the bulk of the material then use a final rinse of methylated spirits or lacquer thinners. Alternatively use warm soapy water. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eApproximate Coverage\u003c\/strong\u003e Practical at 40micron dft Brush or roller 9.0m2\/L Airless spray 8-14m2\/L Conventional spray 8-14m2\/L\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eVOC\u003c\/strong\u003e The WB Primer has a Volatile Organic Content (VOC) of less than 120 grams per litre. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePrecautions\u003c\/strong\u003e When applying in a confined space, use suitable respiratory protection. In common with other solutions WB Primer should not be allowed to remain on the skin and normal hygiene standards should be observed when using this product.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"attributes\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Circle Paints","offers":[{"title":"Default Title","offer_id":51925571305703,"sku":null,"price":103.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/8322\/5831\/files\/White-ExpoxyEnamel_fdc7fcfb-15df-4e72-9bbc-363a7ceae4fa.png?v=1774867112","url":"https:\/\/circlepaints.org.au\/products\/exterior-specialty-roof-paint-gloss-whites-7-5l-solacoat-colour-cream","provider":"Circle Paints","version":"1.0","type":"link"}